| |
User Defined Preferences - POP Tab
General Information
This screen enables each M.O.M. user in your company to
establish "time saving" preferences for order entry and customer
search. These preferences can be changed as often as required by
each user. All entries on the screen are optional.
How to Use the Screen
-
Select the PRINTER FOR POP RECEIPTS.
Note: If you are using a
special receipt printer, you must install it in your Windows
settings as you would any other printer for Windows.
Also, if you choose a printer in user
preferences, then the SEQUENCES must be completed as well.
Leaving the printer blank, M.O.M. will
use the default printer set in Global Parameters.
If
the user is at a workstation that does not have the printer that is
specified in theses preferences, then M.O.M. will prompt for a
printer each time it print a receipt.
-
If you are using a cash drawer with
your workstation, enter the CASH DRAWER OPEN SEQUENCE in the spaces
provided. Note: You
should contact your vendor or technical support of your cash drawer
to obtain the proper cut sequence in ASCII format.
-
To open the cash drawer without
generating an actual sale (for testing purposes), select the OPEN
button after establishing the CASH DRAWER OPEN SEQUENCE.
Note: This function may
also be
performed using the Point of Purchase
Settings screen.
-
If
you have a 40 character receipt printer that can cut the receipt,
enter the CUT SEQUENCE.
Note: You should contact
your vendor or technical support of your printer to obtain the
proper cut sequence in ASCII format.
-
If
you have a 40 character receipt printer that has 2 colors (for
instance, black and red) enter the COLOR SEQUENCE to enable the
second color selection and enter the DEFAULT COLOR SEQUENCE to
disable the second color selection.
Note: You should contact your
vendor or technical support of your printer to obtain the proper
color sequence in ASCII format.
-
Optionally, If you are using a pole
display with your workstation, enter a WELCOME MESSAGE TO BE SHOWN
ON THE POLE DISPLAY in the space provided.
-
Optionally, If you are using a pole
display with your workstation, enter a GOODBYE MESSAGE TO BE SHOWN
ON THE POLE DISPLAY in the space provided.
-
Optionally, If you have an
Authorize.net eCheck Merchant Account and a Magtek® USB Check
Scanner, you can check the CHECK MICR READER USING A SERIAL
CONNECTION option. Then select the port that the check scanner was
assigned to. You will then be able to scan check numbers into
M.O.M. just like credit cards.
Use the CHANGE PASSWORD button, if
enabled, to change the
password for the current user account.
See
Also
User
Defined Preferences - Contact Tab
User Defined Preferences - Customer Tab
User Defined Preferences - General Tab
User Defined Preferences - Order Tab
|
